![background image](http://html.mh-extra.com/html/samsung/sgh-e740s/sgh-e740s_service-manual_1190620022.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-
8
This Document can not be used without Samsung's authorization
1) Make sure that you can distinguish between right
and left screw caps.
1) Use a cruciform screwdriver.
2) After putting front into 2 hooks, tighten screws.
1) Be aware of not damaging on camera key and volume
key FPCBs.
2) Make sure that mic is put into guide hole in good
position.
1) Make sure that slide FPCB and connector are
assembled well.
5
6
7
8
1) Attach screw caps to screws at the
top of slide lower in accord with the
direction(right or left)
2) Attach slide FPCB to the slide
hinge in accord with 2 holes on FPCB.
1) Put front into the 2 hooks at the
top of slide hinge.
2) Tighten 4 screws.
3) Put main keypad on front.
1)
After putting a shield can on front,
stick volume key and camera key FPCB to
front.
2) Put mic on front in accord with guide.
1) Insert slide FPCB into the connector of
main PBA.
2)
Tighten screws.
1)
Attach screw
caps.
1)
Attach FPCB.
1)
Insert 2 hooks
into front.
2)
Put mic on
front
1)Stick key
FPCB
1)Stick key
FPCB
Summary of Contents for SGH-E740S
Page 35: ...8 PCB Diagrams 8 1 Top ...
Page 36: ...PCB Diagrams 8 2 Bottom ...