![background image](http://html.mh-extra.com/html/samsung/sgh-d410c/sgh-d410c_user-manual_1190452074.webp)
Phone Settings
147
Phone Settings
146
SIM Lock
(Menu 7.6.6)
When the SIM Lock feature is enabled, your
phone only works with the current SIM. You
must enter the SIM lock code to use a different
SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN Mode
(Menu 7.6.7)
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your
outgoing calls to a limited set of phone numbers.
The following options are available:
Disable
: you can call any number.
Enable
: you can only call phone numbers stored
in Phone Book. You must enter your PIN2.
Note
: Not all SIM cards have a PIN2. If your SIM
card does not, this menu does not display.
Change PIN2
(Menu 7.6.8)
The Change PIN2 feature allows you to change
your current PIN2 to a new one. You must enter
the current PIN2 before you can specify a new
one.
Once you have entered a new PIN2, you are
asked to confirm it by entering it again.
Note
: Not all SIM cards have a PIN2. If your SIM
card does not, this menu dose not display.
Change Password
(Menu 7.6.4)
The Change Password feature allows you to
change your current phone password to a new
one. You must enter the current password before
you can specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy
(Menu 7.6.5)
Using this menu, you can lock your contents,
such as multimedia and e-mail messages,
photos, videos, voice memos, downloaded
images and sounds. Once you have locked
contents, you must enter the phone password to
access the associated menus.
To
Press the
select an item to lock
Up or Down key. To
lock all of your
contents, select
All
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
lock the marked items
OK
soft key.
When the phone asks for the phone password,
enter the password and press the
OK
soft key.
Note
: The password is preset to “00000000” at the
factory. To change it, see the
Change
Password
menu.