![background image](http://html.mh-extra.com/html/samsung/sgh-c300/sgh-c300_service-manual_1190418012.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-7
This Document can not be used without Samsung's authorization
5
8
7
6
1) Screw up the 6 points with SLIDE JIG.
※
caution
1) Fix the handset on the JIG not to move it down
the Slide.
2) Screw up right size.
1) Fold the FPCB as the picture below.
2) Insert the LCD FPCB to the connector along the
SILK LINE, soldering and attach the green tape,
double sticky tape.
3) Move out the cover of the tape. Fold the FPCB
and push that place.
※
caution
1) Be careful of the damage of FPCB.
2) Attach double sticky tape with white silk line.
1) Assemble the 3*4 Keypad as picture below.
※
caution
1) Be careful of the 3*4 KEY PAD escaping from
the holes.
1) After locking the PAB to the two hooks, insert
the microphone into the holder.
※
caution
1) Be careful of the damage of the devices.
2) Be careful of MIC escaping from the KEY PAD.
M1.4*L3.0
M1.4*L3.0
M1.4*L3.5