![background image](http://html.mh-extra.com/html/samsung/sgh-c250/sgh-c250_service-manual_1190404012.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-7
This Document can not be used without Samsung's authorization
5
8
7
6
1) Insert LCD FPCB[which is connected to
FOLDER] into the bottom of FRONT Hinge.
2) The FOLDER's projection inserts the
FRONT'S hole when Projection is pushed
3) Assemble FOLDER with FRONT
※
caution
1) Be careful not to make scratch and molding
damage!
1) Insert the KEYPAD.
2) Attach side volume key
2) Insert PBA into FRONT.
3) Connect LCD FPCB to PBA CONNECTOR.
※
caution
1) Be careful not to insert keypad into FRONT
incorrectly![Put KEYPAD Holes into FRONT
Projection correctly!
2) Do not miss side key
1) Screw up the FOLDER UPPER at the above
two points.[M1.4*L2.5]
※
caution
1) Be careful not to make scratch and molding
damage!
2) Use 1.1 ± 0.2 Kgf.cm!
1) Attach Screw rubber caps on the screws
by using a pincette.
※
caution
1) Be careful not to make scratch and molding
damage!
SCREW CAP
POINTS