background image

2

.20

Receiving a Fax

If Your Machine is Out of Paper When it Receives a Fax -
Receiving into Memory

If your machine is set to receive a fax automatically and the recording
paper has run out, a paper jam has occurred, or you are making a copy
or printing a list, the incoming documents are automatically stored in
the fax machineÕs memory. After receiving documents, the machine
displays ÔMEMORY RECEIVEDÕ and the cause, ÔNO PAPERÕ, for
example.

You must clear the problem by loading new paper or clearing the jam.
Then your machine will automatically print the fax stored in memory.

If you clear the problem while the machine is receiving documents into
memory, it will print the stored document immediately after you clear
the problem.

Distinctive Ring Pattern Detection (DRPD) - 

(Option)

ÒDistinctive RingÓ is a telephone company service which enables a user
to use a single telephone line to answer several different telephone
numbers. The particular number someone uses to call you on is
identified by a distinctive ringing pattern consisting of various
combinations of long and short ringing sounds. This feature is often
used by answering services who answer telephones for many different
clients and need to know which number someone is calling in on to
properly answer the phone.

Using the 

Distinctive Ring Pattern Detection

feature (

DRPD

), this

machine can ÒlearnÓ the ring pattern you designate to be answered by
the fax machine. Unless you change it, this ringing pattern will continue
to be recognized and answered as a fax call, and all other ringing
patterns will be forwarded to the telephone or answering machine
plugged into the EXT.LINE jack. You can easily suspend or change

Distinctive Ring Pattern Detection

at any time.

With the DRPD feature active, ÔDRPDÕ appears in the display and the
previously set reception mode is ignored. If you turn DRPD off, the
machine returns to any previously set reception mode.

Summary of Contents for SF-5800




































































































Reviews: