Samsung SDZ-375, User Manual, Page: 11 / 25

COLOR CCD CAMERA User Guide
20
COLOR CCD CAMERA User Guide
21
Operating Your Camera
Tips on Using the Motion Detection Feature
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent change in brightness of
an object as motion.
• With the feature enabled, other algorithms may require additional time to operate than
usual.
Notes
FOCUS
1. Press the SET button to access the main setup manu and then position the
indicator over FOCUS using the UP or DOWN button.
2. Press the SET button.
MODE : You can select the most suitable zoom mode. Move the arrow indicator to
’MODE‘ using UP or DOWN button.
MAIN SETUP
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
FOCUS
EXPOSURE
• AUTO : Select AUTO and press the SET button to
confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM)
positions using the UP or DOWN button
while verifying the changes on screen.
Enabling D-ZOOM (ON) means that digital
zoom will activate once optical zoom
ends. Focus is automatically adjusted with
moving zoom.
• ONE PUSH : Focus is automatically adjusted just once,
after zoom position is changed. Select
'ONE PUSH' and press the SET button to
confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM)
positions using the directional buttons
while verifying the changes on screen.
Press the SET button once desired image quality is obtained.
ZOOM POS SETUP
↑
: TELE
↓
: WIDE
ZOOM/FOCUS POS SETUP
↑ : TELE ↓ : WIDE
←
: NEAR
→
: FAR
FOCUS SETUP
MODE AUTO
ZOOM TRK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
END
• This system does not guarantee prevention of fire or theft. The
manufacturer shall not be held responsible for any accident or
damage incurred.
• Connect an external alarm device to MD Out on back of the
camera.
Notes
ZOOM’ position.
• START ZOOM : Use the left or right button in the ‘START ZOOM’ item to select the zoom position
from 1x to 37x to be returned after the ‘SMART ZOOM’ action is over.
• TARGET ZOOM : Use the left or right button in the ‘TARGET ZOOM’ item to select the zoom
position from 1x to 37x to be used during MOTION DETECTION.
• DWELL TIME : Use the left or right button in the ‘DWELL TIME’ item to select a time between
5 and 60 seconds for the dwell time before the zoom is returned to the ‘START
ZOOM’ position. (5,7,10,15,20,30,40,60 sec)
TOP, BOTTOM, LEFT,RIGHT : You can adjust the size of the area