COLOR CCD CAMERA
User Guide
18
COLOR CCD CAMERA
User Guide
19
Operating Your Camera
• You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’ menu is
selected.
• Since the following symptoms may occur according to the ambient illumination when
WDR is selected, set it to OFF.
1
Color or screen changes unnaturally.
2
Noise appears in the bright part of the screen.
• Since the performance of the WDR function may be affected by the area of the bright part
of the screen, optimize the installation angle for the best WDR performance.
• If you increase LIMIT, the screen display may be distorted.
• For high performance of WDR function, We recommend that you set IRIS to AUTO in the
EXPOSURE setup.
Notes
HLC SETUP
▶
LEVEL
LOW
MASK TONE 5
END
||||||||||||
|
|||||||||||||
BLC SETUP
▶
LEVEL
LOW
TOP
30
BOTTOM
70
LEFT
30
RIGHT
70
END
|||||
|
||||||||||||||||||||
|||||
|
||||||||||||||||||||
||||||||||||||||||
|
|||||||
||||||||||||||||||
|
|||||||
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words ‘MOTION DETECTED’ appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object’s movement by sensing
disparity of outline, and level of brightness and color. The camera receives detection
signal from MD output terminal.
• Please press the SETUP button.
- OFF: MOTION DETECTION mode is cancelled.
- ON: Any motion in the selected areas is observed.
AREA SEL
:
You can select the area you wish to observe from the 8 area.
AREA MODE :
Determines whether to use the MD area selected in SENSITIVITY
SENSITIVITY :
You can select up to 8 MD areas. When SENSITIVITY number is
high, motion detection sensitivity is increased to recognize even
small movement
SMART ZOOM :
Smart zoom is operated in connection with MOTION DETECTION.
When the SMART ZOOM function is ‘ON’ while the MOTION
DETECTION mode is ‘ON’, the zoom goes to the TARGET ZOOM
position once motion is detected. Once the zoom action is finished
and ‘DWELL TIME’ has passed, the zoom returns to the ‘START
Motion Detection
MD SETUP
▶
AREA SEL
AREA1
AREA MODE
ON
SENSITIVITY LOW
SMART ZOOM ON
END
AREA SETUP
▶
TOP
3
BOTTOM
6
LEFT
3
RIGHT
6
END
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
SMART ZOOM SETUP
▶
START ZOOM
X1
TARGET ZOOM
X5
DWELL TIME
5 SEC
END
• Select ‘BLC’ to adjust the area to be enhanced and
enhancement level.
• Select ‘HLC’ to adjust the HLC MASK TONE and
LEVEL.