Samsung SDP-9000DXR, User Manual, Page: 39 / 47

Changing your image with Draw
Tool Selection
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Drawing the single line
To draw a Single line, Click the single line icon and then,
1) Position the cursor on the screen where you want the line to start.
2) Press and hold the left/right mouse button.
3) Drag the cursor.
4) To end the line, release the mouse button. SDP-900DXR creates the line.
Drawing the rectangular
To create a rectangular, Click the rectangular icon and then,
1) Place the cursor at a corner of the area you want to select.
2) Click and drag the mouse until the selection is the size you want.
3) Release the mouse button.
Drawing the freehand line
To create a freehand line, Click the freehand line icon and then,
1) Position the cursor on the image where you want the line to begin.
2) Press and hold the left/right mouse button.
3) Drag the cursor on the path you want the line to take.
4) Release the mouse button.
Eraser Tool
1) Click the Eraser tool icon and then the cursor changes to the erasing rectangular.
2) Move the cursor over the line and click to delete the line.
Exit Button
Use the Exit button ( ) to exit GUI Drawing system to normal mode, or clear all the user’s images on the
full screen.