Samsung SDM-090P User Manual Download Page 48

Page: 48 / 69

6.System setting

Set application of password change, buzzer and summer time.

The following screen is displayed if pressing the “ENTER” button with the blinking

indication placed at the “6. SYSTEM SET” on the main menu screen:

- The blinking character moves if pressing “ ”, “ ” button.

- The setting value is changed if pressing “ ”, “ ” button.

BAUD RATE: 4800

↔

9600

↔

19200

↔

38400

↔

4800

Set the baud rate of RS-232.

PASSWORD CHECK: ON

↔

OFF

Set existence of the password inspection in entering into the main menu.

ALARM BUZZER: ON

↔

OFF

Set existence of alarm sound in the occurrence of alarm.

LOSS BUZZER: ON

↔

OFF

Set existence of alarm sound in the occurrence of loss.

SUMMER TIME: ON

↔

OFF

Set application of summer time.

Summer time operation delays the current time from the setting time by an hour and

move up by an hour from the released time and then return to the original time.

5-10

Digital Multiplexer

SDM-090(P)

[SYSTEM SET]

BAUD RATE

38400

PASSWORD CHANGE...
PASSWORD CHECK

OFF

ALARM BUZZER

OFF

LOSS BUZZER

OFF

SUMMER TIME

OFF

→

SDM-090(P)D 6/26/01 5:45 PM Page 5-10

Summary of Contents for SDM-090P






































































Search results

Summary of Contents for SDM-090P

Reviews:

Samsung SDM-090P, User Manual, Page: 48 / 69

Search results

Summary of Contents for SDM-090P

Reviews: