Samsung SDM-090P User Manual Download Page 42

Page: 42 / 69

- The blinking indication moves if pressing “ ”, “ ” button.

- The setting value is changed if pressing “ ”, “ ” button.

LIVE DISPLAY: ALL

↔

TITLE

↔

DATE/TIME

↔

NONE

↔

ALL

PB DISPLAY : ALL

↔

TITLE

↔

DATE/TIME

↔

NONE

↔

ALL

ALL: Both date/time and title are displayed.

TITLE: Only channel title is displayed.

DATE/TIME : Only date/time is displayed.

NONE: Both date/time and title are not displayed.

PB IN: CVBS

↔

Y/C

Set the replay (P, B mode) input.

Y/C: Input of SUPER VHS

CBVS:COMPOSITE BNC input

PIP SIZE: 1/9

↔

1/16

Set the size of the sub-screen in the PIP mode.

BORDER COLOR: WHITE

↔

GRAY

Set color of the division line of the division screen or the PIP screen.

LOSS INFO: ON

↔

OFF

Set in order to advise LOSS information to the screen.

ALARM INFO: ON

↔

OFF

Set in order to advise ALARM information to the screen.

5-4

Digital Multiplexer

SDM-090(P)

[MON OUT SET]

LIVE DISPLAY

ALL

PB DISPLAY

ALL

SPOT OUT...
PB IN

CVBS

PIP SIZE

1/9

BORDER COLOR WHITE
SEQUENCE...
LOSS DETECT...
LOSS INFO

ALARM INFO

→

SDM-090(P)D 6/26/01 5:45 PM Page 5-4

Summary of Contents for SDM-090P






































































Search results

Summary of Contents for SDM-090P

Reviews:

Samsung SDM-090P, User Manual, Page: 42 / 69

Search results

Summary of Contents for SDM-090P

Reviews: