Samsung SDM-090P Page 11 User Manual Download

Page: 11 / 69

1-1

Digital Multiplexer

SDM-090(P)

CHAPTER 1.INTRODUCTION

Introduction

This unit can combine up to 9 Camera Images onto one VCR, and both

frequent recording and sequential recording can be possible in the unit of

Frame and Field, and assigned channel can be played back selectively, and it

is Triplex with which Live Mode, Playback Mode, and Live plus Playback Mode

can be done in one monitor.

Functions and Features

System Setup Menu Button allows you to configure the system the way you

want.

Up to 9 asynchronous camera images (color or black/white) can be

connected.

Up to 9 camera images can be combined onto one monitor so that

multi-screen viewing is made possible.

Multi-view screen which supports simultaneous viewing of live cameras

during playback of recorded scenes

4xzoom is allowed

Using Spot Output, specific screen can be monitored.

With Freeze Function, you can view a still picture.

With Auto Sequence Mode, each channel can be viewed sequentially.

Date, Time, and Alarm Display Functions can be reset.

SDM-090(P)A 6/26/01 5:46 PM Page 1-2

Summary of Contents for SDM-090P






































































Search results

Summary of Contents for SDM-090P

Reviews:

Related manuals for SDM-090P

Brands by name

Popular brands

Samsung SDM-090P, User Manual

Search results

Summary of Contents for SDM-090P

Reviews:

Related manuals for SDM-090P

Brands by name

Popular brands