background image

1

1

1-1

Precautions

Service Manual

1. Precautions

In order to prevent accidents and to prevent damage to the equipment please read the precautions listed
below carefully before servicing the printer and follow them closely.

1.1 Safety Warning

(1) Only to be serviced by appropriately qualified service engineers.

High voltages and lasers inside this product are dangerous. This printer should only be serviced by a suitably
trained and qualified service engineer.

(2) Use only Samsung replacement parts

There are no user serviceable parts inside the printer. Do not make any unauthorized changes or 
additions to the printer, these could cause the printer to malfunction and create electric shock or fire hazards.

(3) Laser Safety Statement

The Printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for
Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product 
conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The
laser system and printer are designed so there is never any human access to laser radiation above a Class I
level during normal operation, user maintenance, or prescribed service condition.

Warning >> Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The

reflected beam, although invisible, can damage your eyes. When using this product, these basic safety 
pre-cautions should always be followed to reduce risk of fire, electric shock, and injury to persons.

CAUTION   - INVISIBLE LASER RADIATION 

WHEN THIS COVER OPEN. 
DO NOT OPEN THIS COVER.

VORSICHT  -  UNSICHTBARE LASERSTRAHLUNG, 

WENN ABDECKUNG GE FFNET. 
NICHT DEM STRAHL AUSSETZEN.

ATTENTION  - RAYONNEMENT LASER INVISIBLE EN CAS 

D OUVERTURE. EXPOSITION DANGEREUSE 
AU FAISCEAU.

ATTENZIONE  - RADIAZIONE LASER INVISIBILE IN CASO DI 

APERTURA. EVITARE L ESPOSIZIONE AL 
FASCIO.

PRECAUCION  - RADIACION LASER IVISIBLE CUANDO SE ABRE. 

EVITAR EXPONERSE AL RAYO.

ADVARSEL. - USYNLIG LASERSTR LNING VED  BNING, N R 

SIKKERHEDSBRYDERE ER UDE AF FUNKTION. 
UNDG  UDSAETTELSE FOR STR LNING.

ADVARSEL. - USYNLIG LASERSTR LNING N R DEKSEL 

PNES. STIRR IKKE INN I STR LEN. 

UNNG  EKSPONERING FOR STR LEN.

VARNING  - OSYNLIG LASERSTR LNING N R DENNA DEL 

R  PPNAD OCH SP RREN  R URKOPPLAD. 

BETRAKTA EJ STR LEN. STR LEN  R FARLIG.

VARO!  - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA 

OLET ALTTIINA N KYM TT M LLE LASER-
S TEILYLLE  L  KATSO S TEESEEN.

service-repairmanual.com

Summary of Contents for SCX-6220









Reviews: