Samsung scx-4100 series User Manual Download

Page: 104 / 169

SING

OUR

RINTER

INUX

6.3

Installing the MFP Driver

System Requirements

Supported OS

Various Linux OS (via USB interface only)

• Redhat 7.1 and above
• Linux Mandrake 8.0 and above
• SuSE 7.1 and above
• Caldera OpenLinux 3.1 and above
• Turbo Linux 7.0 and above
• Slackware 8.1 and above

Recommended Hardware Requirements

• Pentium IV 1 GHz or higher
• RAM 256 MB or higher
• HDD 1GB or higher

OTES

• It’s also necessary to claim swap partition of 300 MB or larger for

working with large scanned images.

• The Linux scanner driver supports the optional resolution at

maximum. see “Scanner and Copier Specifications” on page A.3.

Software

• Linux Kernel 2.4 or higher
• Glibc 2.2 or higher
• CUPS
• SANE

Summary of Contents for scx-4100 series










































































































































































Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands

Samsung scx-4100 series, User Manual

Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands