30
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 139).
•
If you are a Mac or Linux operating systems user, refer to the "Installation
for Mac" on page 130
or
"Installation for Linux" on page 132.
•
The installation window in this
User’s Guide
may differ depending on the
machine and interface in use.
•
Selecting
Custom Installation
allows you to choose which programs to
install.
•
Only use a USB cable no longer than 3 meters (118 inches).
15
Windows
1
Make sure that the machine is connected to your computer and
powered on.
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click
Start
>
All programs
>
Accessories
>
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD-
ROM drive and click
OK
.
3
Review and accept the installation agreements in the installation
window. Then, click
Next
.
4
Select
USB connection
on the
Printer Connection Type
screen. Then,
click
Next
.
5
Follow the instructions in the installation window.
Summary of Contents for SCX-4021S Series
