English_11
●
introduction
ComPonEnT namEs anD funCTions
1
Dome Cover
2
shield Case
3
rotate base :
control rotating angle of camera.
➍
Vari-focal lens module :
3 ~ 10.0mm (F1.4).
5
function setup switch :
Display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
6
Video output Terminal to monitor
7
Pan base :
Control panning angle of camera.
8
Power input Connector
9
rs-485- :
Signal port for RS-485 communication.
❿
rs-485+ :
Signal port for RS-485 communication.
⓫
D & n input Terminal :
You can switch to Day & Night Mode by connecting an external
signal to this terminal.
⓬
ground Terminal
.
⓭
Video output Jack :
Video signals are output through this port. Connect this port to the
Video IN port of a monitor.
⓮
ir lED :
These infrared LED’s are controlled by the illumination sensor.
⓯
illumination sensor :
Detects incoming light to control the IR LED.
⓰
alarm ouT :
Output port that signals when a motion is detected
TOP
FRONT
SE
T
VIDEO
➊
➋
⓮
➌
➍
➎➏
⓯
➑
➒
❿
⓬ ⓫
⓭
❼
⓰