manualshive.com logo in svg

Samsung SCV-3080 Series, User Manual, Page: 18 / 48

Share
Download
Samsung SCV-3080 Series User Manual Download Page 18

COLOR DOME CAMERA

SCV-3080

18

Installation

Optional Accessories for Installation

C

•
•
•

• The case of ceiling installation

➊

  After mounting the camera on the ceiling, adjust the panning angle according to the 

monitoring direction. You should adjust the panning angle lest that the video be 
displayed upside down on the monitor.

➋

 Adjust the Rotate position to fit the video to the screen borders.

➌

 Then, adjust the tilting angle so that the camera faces the monitoring direction.

4

1)   WALL MOUNT ADAPTOR(SCX-300WM)/

HANGING MOUNT(SCX-300HM) This adaptor 
is used when installing the dome camera 
onto a wall.

For your easier installation, you can purchase appropriate optional accessories.

2)  CEILING MOUNT ADAPTOR(SCX-300CM)/ 

HANGING MOUNT(SCX-300HM) This adaptor 
is used when installing the dome camera on 
a concrete ceiling.

3

 •   For smoother Rotate adjustment, set the Tilt position between 60˚ ~ 80˚.

Notes

Summary of Contents for SCV-3080 Series

















































Reviews:

No comments