COLOR DOME CAMERA
User Guide
42
COLOR DOME CAMERA
User Guide
43
Specifications
SCV-2120
SCV-2120P
POWER
Input Voltage
AC 24V(±10%) , DC 12VV(±10%)
Power Consumption
MAX 3.5W
CCD
Imaging Device
1/4 inch, Super HAD color CCD
Total Pixels
811(H) x 508(V)
795(H) x 596(V)
Effective Pixels
768(H) x 494(V)
752(H) x 582(V)
OPTICS
Optics
12X f=3.94mm(WIDE) ~ 46.05mm(TELE) / F1.67 ~F1.88
Min. Focus Distance
1,800mm(TELE)
D. ZOOM
OFF/ON (Limit 16x)
Angle Field of view
H : Appr. 51.54°(Wide) to 4.50°(Tele) / V : Appr. 39.24°(Wide) to 3.38°(Tele)
SYNC
Scanning System
2:1 Interlace
Synchronization
Internal / Line-Lock
Frequency
H :15.734 KHz / V : 59.94 Hz
H : 15.625 KHz / V : 50.00 Hz
ELECTRICAL
Resolution
Color : 600TV Lines(Min.) / B/W : 700TV Lines(Min.)
Min. Illumination
Color : 0.2 Lux/F1.67 (50 IRE) / B/W : 0.02 Lux/F1.67 (50 IRE)
S/N (Y signal)
52 dB (AGC Off,Weight ON)
Video Output
CVBS : 1.0Vp-p/75Ω
Focus
Auto / Manual / One push
Zoom Movement Speed
1.9 sec : WIde to Tele
IRIS Control
Auto,Manual
Lens Initialize
Built-In
Camera Title
OFF / ON (Displayed 15 characters)
Camera ID
255 ID Selectable
Day & Night
Auto / COLOR / B/W
Gain Control
LOW / MEDIUM / HIGH / MANUAL / OFF
White Balance
ATW / AWC / MANUAL / INDOOR / OUTDOOR (1,700k ~ 11,000K)
Back Light Compensation
SSDR / BLC / HLC / OFF
SHUTTER
ESC / FLK / MANUAL (1/60(PAL 1/50)~1/120K sec, x2 ~ x512 sec)
O.S.D
Korean, English, Japanese, Spanish,
French, Portuguese, Taiwanese
English, Spanish, French, Italian, German,
Polish, Russian, Czech, Chinese,
Portuguese, Romanian, Serbian, Swedish,
Danish, Turkish
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
• Nothing appears on the screen.
▶
Check that the power cord and line connection between the camera and monitor are
fixed properly.
▶
Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
•
The image on the screen is dim.
▶
Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶
Set the monitor to proper condition.
▶
If the camera is exposed to too strong light, change the camera position.
•
The image on the screen is dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75
Ω
/ Hi-z properly.
•
The camera is not working properly, and the surface of the camera is hot.
▶
Check that you have properly connected the camera to an appropriate power source.
•
The SENS-UP function does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
•
The Motion Detection function does not work.
▶
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
•
Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu .
•
The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
•
When coaxial communication is not available:
▶
Make sure that the camera and monitor are installed within the recommended distance.
▶
Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.