COLOR DOME CAMERA
User Guide
36
COLOR DOME CAMERA
User Guide
37
Operating Your Camera
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status
when controlling the camera through an external
controlled device.
When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘COMM ADJ’.
Set up the mode moving the 4 direction of Function Setup Switch.
IMAGE ADJ : Includes image quality or special function factors.
COMMUNICATION SETUP
▶
PROTOCOL
SAMSUNG-T
CAM ID
1
BAUD RATE
9600
UART MODE
8-N-1
RET PKT
DISABLE
RETURN
|
|||||||||||||||||||||||||
- CAM ID : Determines the camera's identification number (between 0 and 255).
- Protocol : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/PELCO-P/
BOSCH/HONEYWELL/VICON/AD/SAMSUNG-E/PANASONIC)
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : You can choose whether to send an ACK signal when the communication
control command is issued to the camera.
SPECIAL SETUP
PRIVACY
OFF
DAY/NIGHT
AUTO
DIS
OFF
SYNC
INT
COMM ADJ
IMAGE ADJ
MONITOR
CRT
When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'IMAGE ADJ.
Select a desired mode by moving the up or down direction of the Function Setup
Switch.
- H-REV : You can flip the picture horizontally on the
screen.
- V-REV : You can flip the picture vertically on the screen.
- SHARPNESS : As you increase this value, the picture
outline becomes stronger and clearer.
IMAGE SETUP
▶
H-REV
OFF
V-REV
OFF
SHARPNESS
ON
RETURN
SHARPNESS SETUP
▶
LEVEL
16
RETURN
||||||||||||||||||||
|
|||||
• INT : Internal synchronization
• LL : External line-lock synchronization
· If you choose 'LL', you can adjust the desired phase.
Press the SET button.
· You can adjust the desired phase from 0 to 359.