manualshive.com logo in svg

Samsung SCP-3250, User Manual, Page: 37 / 54

Share
Download
Samsung SCP-3250 User Manual Download Page 37

English 

_37

●

  

SETUP

Select <

PRESET SPEED

> and adjust the pan/tilt speed of the preset.

Set the <

DWELL TIME

> that defi nes the camera's hold duration and <

IMAGE 

HOLD

> of the preset.

If you set the <

IMAGE HOLD

> to <

ON

>, the video image will be held still until the 

camera reaches the preset position.

Set <

CAMERA SET

> to <

ON

>.

You can adjust camera setups for each 
preset.

For details on setting <

IRIS

>, <

WHITE BAL

> 

and <

FOCUS MODE

>, refer to “

CAMERA 

SET

”. (pages 24 ~ 33)

If VPS is set to ON in Camera Setup from 
the main menu, the camera will operate in 
VPS even if it's set to WDR in PRESET.

If you use WDR in PRESET, the camera will operate in WDR and release any previous 
settings even if AGC has been set to FIX, SHUTTER to ON, SENSE UP to FIX in the 
main menu.

The preset position can be specifi ed for a tilt range of between -6° and 90°. 
Those presets that are out of a tilt of 90° can not be specifi ed.

If you try to specify a preset position for a range exceeding a tilt of 90° using a 
controller (SSC-1000, 2000 or 5000), you will see a message of <

SET AGAIN

> on 

the screen. If this is the case, try again for a range below a tilt of 90°.

If you upload/download the menu setting using SSC-1000, 2000 or 5000, the 
preset may differ from the menu setting so defi ne the preset again after the 
operation.

5.

6.

7.

M

  CAMERA SET  

  CAMERA SET  

IRIS ALC
WHITE BAL 

WHITE BAL 
FOCUS MODE 

MF

FOCUS MODE 

MF

Z6806126301A-SCP-3250(P)-ENGLISH37   37

Z6806126301A-SCP-3250(P)-ENGLISH37   37

2010-05-04   오후 2:59:43

2010-05-04   오후 2:59:

Summary of Contents for SCP-3250























































Reviews:

No comments