42_
interface symbols
English
English
_ 43
INTERFACE SYMBOLS
Motion Detection Standby/Operation Display :
When in standby mode, the " " in the upper right of the screen blinks and then
changes to " " if motion is detected.
Alarm Input Port Status Display :
"
①
","
②
" in the upper right of the screen blink.
Current Alarm Port Display According to Input Alarm Ports(Priority) :
Only one of "
➊
","
➋
"
in the upper right of the screen blinks.
Preset Number Display Settings :
'*' : If a preset number is already available
'H' : If a preset location is the camera’s home position
If an OSD Menu has Sub Menus :
"
" displays at the end of the menu.
If an OSD Menu Does Not Have Sub Menus :
No symbol appears at the end of the menu.
PTZ Function Screen :
Preset Number Setting Screen :
•
-
•
-
•
-
•
-
-
•
-
•
-
•
•
Preset Edit
Preset=011*
(1~255)
ID=001
➊①②
Area1 Area Name
G-SEQ1
PRESET=001 Preset Name
P:300 T:040 10X
Preset Info
Sequence Status
Motion Detect
Alarm Input
Area Display
interface symbols
OSD Menu Screen :
OPERATING YOUR CAMERA
Panning and Tilting
Use the joystick of the controller or its direction buttons.
Controlling Zoom
Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the zoom
buttons.
Accessing Screen Menus
Press the Menu or OSD button on the controller.
For more detailed information about controls using a third party controller or a DVR, refer
to the user’s manual of the product.
OSD COMMANDS, FUNCTION CHART, AND MENU
CONTROLS
This dome camera can be operated using two methods: Using hot keys on its dedicated
controller, or accessing the OSD (On Screen Display) on the video output. The OSD menu
commands are as follows:
Command
Function
Move the joystick up/
down/left/right
Moves the OSD menus up/down/left/right, respectively.
Enter/Focus Far
Selects a menu and allows access to the sub menus.
ESC/Focus Near
Cancels a command and moves back to an upper-level menu.
•
•
-
•
-
•
-
❋
Camera Setting
Zoom/Focus
White
Balance
ATW(IN)
---
---
Sub Menu Not Available
Sub Menu Available