manualshive.com logo in svg

Samsung SCP-3120V, User Manual, Page: 20 / 51

Share
Download
Samsung SCP-3120V User Manual Download Page 20

38_

 

installing your camera

installing your camera

English 

English

 _ 39

INSTALLING YOUR CAMERA

Connect the safety wire (attached to the camera) to the surface mount as shown. Then, 
arrange the cables. (For more information about the wiring, refer to "Camera Wiring 
Interface Board(17 Page)".)

Arrange the cables inside the surface mount so that they should not be entangled or 
stuck in, and align the guide rib of the camera with that of the surface mount. Use the 
L-shaped wrench to tighten the screws (x4) so that the camera is secured to the 
mount. To ensure waterproofness, take caution lest that the outer gasket should get 
loose or be stuck in.

3.

4.

SAFETY-WIRE

SURFACE MOUNT

SCREW

MAIN-FRAME

GASKET

Guide-Rib of MAIN-
FRAME

Guide Rib of SURFACE
MOUNT

SCP-3120V (MOUNT ONTO THE OPTIMAL ADAPTOR)

 Follow step 1 in "Ceiling Mount" above and remove the surface mount.

  Insert the cables into the cable hole on the surface mount and fi x them to SBP-302F 
(HANGING MOUNT) using SCREW-MACHINE (BH, M4xL10, x4).

Repeat step 3 through step 4 in "Ceiling Mount" above to complete the installation.

1.

2.

3.

Summary of Contents for SCP-3120V




















































Reviews:

No comments