English
- 29
●
CONNECTION & INSTALLATION
PREPARING ADAPTER AND CABLES
Power Adapter
Power adapter has the capacity of AC24V 2.5A.
After connecting the power cable by separating the power connector from the terminal, make the connection between
terminal and connector by using a bolt.
Video Cable
The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below :
If the distance between the camera and the monitor exceeds the recommended maximum, please use
an auxiliary video amp.
If the camera is controlled through coaxial communication, please use a video amp intended for coaxial communications.
Regular video amps do not transfer coaxial signals.
Communications Cable
For the camera to communicate with the controller, a
RS-485/422 communications line is required. To ensure the
quality of long distance communication and the accuracy of the
overall communication it is recommended using a twisted pair
cable such as UTP.
Depending on the camera’s environment, the communications distance may vary.
Neither the video nor communications cable is enclosed with the camera.
y
M
y
M
y
M
Distance
Recommended Cable
Specification
300m
4C2V(RG-59/U)
450m
5C2V(RG-6/U)
600m
7C2V(RG-11/U)
<Camera Wiring Interface Board>
