manualshive.com logo in svg

Samsung SCO-6023R, User Manual, Page: 24 / 33

Share
Download
Samsung SCO-6023R User Manual Download Page 24

24_ camera operation

camera operation

 

y

VIDEO OUTPUT

 

❶M

 If the SPECIAL menu screen is displayed, use the Function Setup switch so 

that the arrow indicates ‘VIDEO OUTPUT’.

❷MM

Select a desired mode using the Function Setup switch.

 

-

HD : HD Video resolution(1920X1080)

 

-

SD : SD Video resolution

 

M

 

`

Please exit the menu and hold the  “function setup switch” for over 5 seconds, it can switch HD/SD.

 

y

DAY/NIGHT :

 

 You can display pictures in color or in black and white.

 

❶

  If the SPECIAL menu screen 

is displayed, use the Function 

Setup switch so that the arrow 

indicates ‘DAY/NIGHT’.

❷

  Select a desired mode using 

the Function Setup switch 

according to the picture display you want.

 

-

AUTO :

  The mode is switched to ’Color‘ in a normal environment, but 

switches to  ’B/W‘ mode when ambient illumination is low. To set up 

the switching time for AUTO mode, press the Function Setup switch.  

You can turn on or off the burst signal on B/W mode.

 

y

BURST MODE :  Activate or deactivate  the burst mode to maintain or 

remove the color signal.

 

y

DURATION :  This function is used to select the brightness of light where 

switching occurs.

 

y

DWELL TIME :  You can select day/night switching delay time from. 

➝ 

3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s

 

M

 

`

If you set the AGC mode to off on the exposure menu, you cannot switch the day/night mode to auto.

 

`

When a bright light source is in the screen or there are frequent brightness changes, if you use the 
auto night/day mode, and set the switching time to short (3, 5 sec), a hunting can be caused.  In this 
situation, it is recommended to use the default setting (30 sec).

 

-

COLOR

 : The picture is always displayed in color.

 

-

B/W

 :  The picture is always displayed in black and white.

 

y

BURST MODE :  A ctivate or deactivate the burst mode to maintain or 

remove the color signal.

 

y

IR MODE :  W hen IR LED is turned on in B/W, the objects can be clearly 

identified due to the function that decreases screen saturation of 

objects within a short distance.

AUTO SETUP

 1. 

BURST MODE

 

ON

2. 

DURATION

 

NORMAL

3. 

DWELL TIME

 

30 SEC

4. 

RETURN

Summary of Contents for SCO-6023R


































Reviews:

No comments