COLOR CCD CAMERA
User Guide
20
COLOR CCD CAMERA
User Guide
21
Operating Your Camera
• For effective viewing of license plates, there is a minimum required illumination and
the shutter speed needs to be faster than 1/200sec.
• Because there can be a difference in the effectiveness of HLC according to the
amount of light area in the screen, optimize the installation angle for the best HLC
performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size.
(In NIGHT ONLY mode.)
• The HLC is not activated in day light or when bright light is not present at night.
(In NIGHT ONLY mode.)
• The HLC is not activated when the D-ZOOM mode is 'ON' or DIS mode is 'ON'.
Notes
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.
• Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.
• HLC : Enable the user to change the level,
mask tone area.
HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the light
can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.(LOW,MIDDLE,HIGH)
- MASK TONE : Change the brightness
- LIMIT : Enable to change the operating condition.
2. Select a desired mode using the Function Setup Switch.
OFF : Not being used
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
MAIN SETUP
SSDR
ON
WHITE BAL
ATW
BACKLIGHT
OFF
MOTION DET
OFF
FOCUS
Motion Detection
This product has a feature that will detect movements of objects in 8 different areas on the
screen. The camera detects an object’s movement by sensing disparity of outline, brightness
levels and color. The camera sends a detection signal out via the MD output terminal and will
zoom into a pre-determined point.
1. Please press the Function Setup Switch.
OFF : MOTION DETECTION mode is cancelled.
ON : Any motion in the selected areas is observed.
• AREA SEL : You can select 8 different sensitivity MOTION
DET area.
• AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
• SEL POS(XPOS/YPOS) : You can control MD area size.
• SMART ZOOM : Smart zoom is operated in connection
with MOTION DETECTION. When the
SMART ZOOM function is ‘ON’ while the
MOTION DETECTION mode is ‘ON’, the
zoom goes to the TARGET ZOOM
position once motion is detected. Once
the zoom action is finished and ‘DWELL
TIME’ has passed, the zoom returns to
the ‘START ZOOM’ position.
MOTION DET SENSTIVITY
AREA1
MIN
AREA8
MAX
