107
D
Diissp
plla
ay
y
106
D
Diissp
plla
ay
y
Dual Clock
MENU 8-5
You can choose two time zones to be displayed when
you select
Dual Clock
for the wallpaper image; for
details, see page 96.
To select time zones for the dual clock:
1. When
Location
highlights, press the key.
2. Select the time zone for the first clock by pressing the
or key and press the key.
3. Select the time zone for the second clock by pressing
the or key.
4. Press the
OK
key to confirm the selection.
5. To set the DST (Daylight Saving Time), see below.
To exit, press the
CLR
or key.
To apply the daylight saving time:
1. When
Location
highlights, press the or key
to display
DST
. Press the key.
2. Select
Yes
to use the daylight saving time for the
first clock. Otherwise, select
No
.
3. Press the key and repeat step 2 for the second
clock.
4. Press the
OK
key to confirm the selection.
Backlight
MENU 8-3
You have several options for setting how the LCD
backlight operates. Remember that backlight use drains
your battery faster.
The following options are available:
Folder open
: The backlight remains on when the folder
is open.
30 seconds
: The backlight switches on when you press
a key and switches off 30 seconds after that. Then the
display turns off after 30 seconds.
8 seconds
: The backlight switches on when you press
a key and switches off 8 seconds after that. Then the
display turns off after 52 seconds.
Banner
MENU 8-4
This menu allows you to set a banner message to be
displayed at the bottom of the display in Standby mode.
1. If necessary, press the
key to delete each letter
of the old greeting. Press are hold the
key to
clear the display.
2. Enter your banner message. For further details about
how to enter characters, see page 41.
3. When you finish entering the message, press the
OK
key to save the new banner.