192
Debugging
USB debugging
When enabled, allows debugging when the device is
attached to a PC by a USB cable.
From the
Developer options
screen, touch
USB
debugging
to enable or disable the setting. When
enabled, a check mark appears in the check box.
Allow mock locations
This setting is used by developers when developing location-
based applications.
From the
Developer options
screen, touch
Allow mock
locations
to enable or disable the setting.
When enabled, a check mark appears in the check box.
Select app to be debugged
From the
Developer options
screen, touch
Select app to
be debugged
to select one of the apps you are
developing for debugging.
Wait for debugger
From the
Developer options
screen, touch
Wait for
debugger
to delay launcing of the Select app to be
debugged until the debugger has attached.
Input
From the
Developer options
screen, under
Input
, touch
the check box next to each of the following options to
enable it: (When enabled, a check mark appears in the
check box.)
• Show touches
: Displays touch interactions on the screen.
• Show pointer location
: Highlights the data that was touched
on the screen.
DRAFT
FOR
INTERNAL
USE
ONLY