![background image](http://html2.mh-extra.com/html/samsung/sch-r500/sch-r500_user-manual_4747852056.webp)
56
4.
Press the
Options
(right) soft key (
).
5.
Use the navigation keys to highlight
Save
, then press the
key. The
following options appear in the display:
• Create New
— Lets you create a new Contacts entry.
• Update Existing
— Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
For more information on saving the number, see
“Saving a Number from a
Call”
on page 54.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal
Contacts
command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note:
The Contacts command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press the
key to launch
VoiceSignal
.
“
Say a Command
” appears in the display and is pronounced through the
speaker.
2.
Say “
Lookup
”.
VoiceSignal prompts you to “
Say the name.
”
3.
Speak clearly and say the full name of the person you want to call, exactly
as it is entered in your contact list.
•
If VoiceSignal recognizes the name you said, the contact information for that
name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with “
Did you
say?
” followed by the first name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 128., for more information.)
•
To say the name again, press the
Repeat
(right) soft (
) key.
•
To exit VoiceSignal without dialing, press the
Settings
(left) soft (
) key,
then press the
Exit
(right) soft (
).
5.
The contact information for the name you selected appears in the display.