![background image](http://html.mh-extra.com/html/samsung/sch-r312-series/sch-r312-series_user-manual_1189976040.webp)
37
•
To discard your changes, press . You are prompted to confirm
exiting without saving your changes. Press the
Yes
soft key to
discard your changes.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called pauses,
up to a maximum of 32 digits.
•
Wait
— Stops the calling sequence until the phone receives further
input.
•
2-Sec Pause
— Stops the calling sequence for two seconds, then
sends the remaining digits.
Note:
You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time of
four seconds. Keep in mind that pauses count as digits towards the 32-
digit maximum.
To add pauses to a Contacts entry number, do the following:
1.
Find the Contacts entry associated with the number you
want to include one or more pauses. (For more information,
refer to
“Finding a Contacts Entry”
on page 33.)
2.
Select and edit the desired number. (For more information,
refer to
“Editing a Contacts Entry”
on page 36.)
3.
Press
Options
. The following pause options appear in the
display:
• 2-Sec Pause
— A 2-second pause after which dialing resumes.
• Wait
— A hard pause (waits for input from you).
4.
Select the pause option of your choice to add it to the
number sequence.
5.
When you’re finished entering information, press
to
store the number to Contacts.
Pause Dial from Contacts
1.
If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
. (For more information, refer to
“Finding a Contacts
Entry”
on page 33.)
2.
If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
3.
Press
to resume dialing the number.
Edit an Existing Email Address
1.
Find the Contacts entry you want to edit. (For more
information, refer to
“Finding a Contacts Entry”
on page 33.)
r312.book Page 37 Tuesday, November 10, 2009 11:14 AM