![background image](http://html.mh-extra.com/html/samsung/sch-r312-series/sch-r312-series_user-manual_1189976103.webp)
Voice Service 100
Sensitivity
1.
At the
Voice SVC
menu, select
Voice Settings
➔
Sensitivity
. The
Sensitivity
screen appears in the display.
2.
Use the Navigation key to adjust the selected Sensitivity
setting toward
Reject More
spoken commands or names or
toward
Reject Less
spoken commands or names.
3.
To accept the new setting, press
.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice. Adapting
can improve the accuracy of digit recognition, especially for people
with strong regional accents.
Note:
After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
Digit Dialing to factory defaults. (For more information, refer to
“Reset
Digits”
on page 101..)
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
•
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there is
an unexpected noise that spoils the recording, re-record that sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people using
your phone. (You can always reset digit adaptation to its original state,
as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
At the
Voice SVC
menu, select
Voice Settings
➔
Digit
Dialing
➔
Adapt Digits
.
Your phone displays the first digit sequence and “
Please
say
” plays through the speaker followed by the four digits
appearing in the display.
2.
Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
•
If the recording was good, say “
Yes
.”
•
If you need to re-record, say “
No
.”
r312.book Page 100 Tuesday, November 10, 2009 11:14 AM