![background image](http://html.mh-extra.com/html/samsung/sch-n500/sch-n500_service-manual_1189959020.webp)
SAMSUNG Proprietary-Contents may change without notice
Circuit Description
5-6
This Document can not be used without Samsung's authorization
5-3 Test Command Table
To change the phone from normal mode to test mode, you should enter the following keys. :
Press [4 7 * 6 8 # 1 3 5 8 0]
Command No
Command SW Name
Description
1
T_SUSPEND_I
/* Enter to test menu */
2
T_RESTART_I
/* Escape from test menu */
7
T_CARRIERON_I
/* Turn on the carrier */
8
T_CARRIEROFF_I
/* Turn off the carrier */
9
T_LOADSYN_I
/* Load the synthesizer for locking */
14
T_CDATA_I
/* Continuously send TX control data */
15
T_CDTRK_ADJ_I
/* CDMA TRK local adjust */
16
T_CDMA_TXADJ_I
/* Sets tx_agc_adj for cdma mode */
21
T_TEST_SYS_I
/* Set TEST_SYS */
22
T_SNDNAM_I
/* Send NAM information */
23
T_SNDVERSION_I
/* Send software version */
24
T_SNDESN_I
/* Send ESN */
39
T_BACKLIGHT_ON_I
/* Backlight on
*/
40
T_BACKLIGHT_OFF_I
/* Backlight off */
41
T_LAMP_ON_I
/* Lamp on */
42
T_LAMP_OFF_I
/* Lamp off */
43
T_LCD_CONTRAST_I
/* LCD contrast adjust */
45
T_VIBRATOR_ON_I
/* Activate a vibrator */
46
T_VIBRATOR_OFF_I
/* Inactivate a vibrator */
47
T_DTMFON_I
/* Turn on DTMF */
48
T_DTMFOFF_I
/* Turn off DTMF */
51
T_BATT_TYPE_I
/* Battery type */
52
T_READ_BATT_I
/* Saved low battery value read */
53
T_VBATT1_I
/* Set the low battey position in the standby
*/
54
T_VBATT2_I
/* Set the low battey position in the talking */
55
T_WRITE_BATT_I
/* Write a BATT */
56
T_THERM_READ_I
/* Read a Thermister */
58
T_CLR_LIFETIME_I
/* Clear Life Time */
59
T_CARRIER_I
/* Carrier selection */
60
T_CLEAR_ALL_I
/* Clear all */
72
T_HIGH_TXRAS_ADJ_I
/* High gain TX pwr RAS adjust */
73
T_TXRAS_ADJ_I
/* Low gain TX pwr RAS adjust */
74
T_CH_FLATNESS_I
/* CDMA TX pwr ch. flatness */
76
T_CDMA_PWR_LIMIT_I
/* CDMA TX pwr limit */
79
T_CDMA_TEMPCOMP_I
/* CDMA temp. compensation */
121
T_CDMA_VGA_OFFSET_I
/* CDMA DVGA offset */
127
T_CDMA_BTF_I