145 Settings
4.
If you selected
Manual
for your updates, tap
Check Now
at the next screen
after the installation wizard. If any updates are available, they will install.
5.
Tap
Done
after update installation, if any available, is finished.
Connections Settings
Beam
A Beam connection can be established by:
1.
From the
Today
screen, tap the right soft key function
Main Menu > Settings
> All Settings > Connections
tab
> Beam
.
2.
Tap the box to place a check mark to receive all incoming beams, if desired.
3.
Tap
to save your changes and return to the previous screen.
Bluetooth
Bluetooth
is a short-range wireless communications technology capable of exchanging
information over a distance of about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If
the devices are within a range of one another, you can exchange information between
them, even if they are located in different rooms.
•
For more information, refer to "Bluetooth and Wi-Fi Services" on page 108.
Connections
Connections
allows you to set your network connection settings.
1.
From the
Today
screen, tap the right soft key function
Main Menu > Settings
> All Settings > Connections
tab
> Connections
.
2.
Make any changes, if necessary, in the
Tasks
or
Advanced
tabs.
3.
Tap
to save your changes and return to the previous screen.
Domain Enroll
You can enroll into a domain to connect your device with company resources. You will
need the enrollment password provided by your system administrator.
1.
From the
Today
screen, tap the right soft key function
Main Menu > Settings
> All Settings > Connections
tab
> Domain Enroll
to open the Domain
Enrollment screen.
2.
Tap
Enroll
.
3.
Tap
Next
. Read the on-screen instructions to enroll.
USB Connection Mode
USB Connection Mode
allows you to select a function for your device when using a USB
connection.