Tools
136
6. Press and hold any button on the remote control of the
device, until the message “Setup is completed” appears in
the
Status
field.
7. When you have successfully completed the operation, tap
to save the setting and tap exit the screen.
Learning the device
1. Open the remote control list.
2. Select the device you want to learn.
3. Tap
Menu
→
Mapping
.
4. Align the IrDA port on your phone with the IrDA port on the
remote control of the device.
5. Tap the button that you want to programme. For example,
if you want your phone to learn “Power”, tap it first.
6. Press the corresponding button on the remote control of
the device you added. For example, if you tapped
Power
on your phone, press the power button on your remote
control.
When your phone has learned the button, a check mark
appears on the onscreen button.
7. To continue for additional buttons on your remote control,
repeat steps 5 and 6.
8. When you have finished programming, tap
at the top
right corner of the screen.
Using a device
1. Tap
to open the remote control device list.
Summary of Contents for SCH-I839
Page 2: ...Draft 2006 11 03 SCH I839 User s Guide ...
Page 3: ......
Page 187: ...Health and safety information 184 ...