![background image](http://html.mh-extra.com/html/samsung/sch-i830-series/sch-i830-series_service-manual_1189896074.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly and Assembly Instructions
8-
8
This Document can not be used without Samsung's authorization
※ Caution
1. be careful not to damage FPCB
2. be careful not to damage connector lock
3. confirm FPCB is fully inserted into connector lock
※ Caution
1. Be careful not to tear down FPCB
2. when assembling side keys make sure it's in the
right direction
※ Caution
1. confirm keys are placed on the right place
2. be careful not to give excessive pressure while
assembling FRONT and REAR
3. make sure there is no openings between FRONT and REAR
※ Caution
1. when inserting covers, use urethane form JIG
2. be careful not to make any scratch while
assembling FRONT and REAR
7
8
1.put ear
-
cover into REAR
2.at first press antenna spot to combine FRONT with REAR
3.assemble FRONT and REAR by order described on the
pictures
1.screw 4 points
2. while inserting IF cover, make sure it's in the right
direction
3.before inserting screw cap ,check direction mark inside
the cap
5
6
1.remove the cover of an adhesive tpae and unfold connector
lock
2.slide FPCB into connector lock until the white line on
the FPCB meets connector
3.press FPCB over an adhesive tape and close connector lock
1.place BT antenna and mic onto FRONT
2.place PBA onto FRONT
2.fix FPCB at FRONT than put volume key and switch key into
FRONT
unfold connector lock
slide FPCB into connector lock
close connector lock
press FPCB over an adhesive
tape
place BT,mike
place PBA
place switch
fix FPCB
place volume key
volume key
switch key
put ear
-
cover
start assembly by
pressing antenna spot
then press the lower
side of antenna
press spot near the
ear jack
press spot near the
side key
screw 4 points