![background image](http://html.mh-extra.com/html/samsung/sch-i830-series/sch-i830-series_service-manual_1189896024.webp)
SAMSUNG Proprietary-Contents may change without notice
Product Support Tools
5-2
This Document can not be used without Samsung's authorization
5-2. PST (Product Support Tool)
5-2-1. Getting Started
MAIN MENU SCREEN
1. Double Click on your "UniPst" on UniPst-Sprint folder.
2. Select SCH-i830
The Main Menu Screen shows the basic tasks that are available.
CAUTION: DO NOT attempt to program phone with a low battery.
PST SETUP
UniPst supports SAMSUNG Mobile phone. You can select virtual USB port.
5-2-2. Operation Procedure
Service Programming
Before start service programming, you must change phone mode of SCH-i830
The Service Programming screens enable you to set and change the service activation parameters of the
phones.
Read Data from File
Click "Open mmc" icon to select the name of a file whose extension is "mmc". The values will be read
from the named file, and will initialize the parameter values seen on the Service programming screen
Read Data from Phone
Click Read from the Phone icon to upload the current programmable parameters of the phone. The
values are read from the phone, so the phone must have the power ON and be properly connected
to the PST.
NOTE: To actually view the data you need to go to the Edit Items screens.
Edit Items
Click this icon to edit Number Assignment Module (NAM) items or UI items.
1. General : Slot Cycle Index, Service Code
2. NAM1
Save Data to File
Click this icon to save the current parameters to a file. Once you enter a filename, Click <OK> button to
write all current parameters to that file. This way the same information can be downloaded into multiple
phones.