4-30
C
Ca
allll F
Fu
un
nc
cttiio
on
ns
s
R-UIM Lock
In the
R-UIM Lock
tab, you can enable or disable the R-
UIM Lock feature. When this feature is enabled, your
phone only works with the current R-UIM card.
To enable the R-UIM Lock feature, select
Enable
and then
tap the
Change
button. When you are asked to enter the
password, enter the password in the
Password
field.
Once you have entered the lock code, you are asked to
confirm it by entering it again. You must enter a four- to
eight-digit R-UIM Lock code. Then tap the
OK
button.
“Enable” appears in the
Current status
field.
To disable the feature, select
Disable
and then tap the
Change
button. “Disable” appears in the
Current status
field.
My Phone #
In the
My Phone #
tab, you can change the default
number registered on the current R-UIM card to the
actual subscriber number. Once you enter the phone
number, your phone number is displayed when you call
somebody or send a message to somebody.
Enter the actual subscriber number in the
Edit My Phone
#
field and tap the
Save
button. You must enter a ten- to
eleven-digit phone number.
Clear memory
In the
Clear memory
tab, you can erase your phonebook
and messages stored in the R-UIM card and reset your R-
UIM card to the factory setting. Select the option you
want from
Phone Book
,
Message
and
All
and then tap
the
Select
button.The Notice dialog box appears.Tap
OK
to reset it and the phone turns itself off and reboots.
Otherwise tap
Cancel
.