35
C
Ca
allll F
Fu
un
nc
cttiio
on
ns
s
34
C
Ca
allll F
Fu
un
nc
cttiio
on
ns
s
4. Enter the number to be sent after the pause, such as
credit card number or bank account number, and
then press the
key to dial the first number.
5. To transmit the additional number after connecting,
press the
key again at the prompt for the
pause.
“SENDING DTMF” flashes on the display and the
transmitted tone sounds.
Voice Dialling
Before using the voice dialling feature, you must
record names and numbers in your phone using the
Voice Dial
menu (
Menu 6-1
). For further details, see
page xx.
1. To place a call, press and hold the
key or open
the folder, depending on the
Activate By
menu
(
Menu 6-1-4
). See page xx.
2. At a voice prompt, say a name into the microphone.
• If the phone recognises the name, the phone
attempts a connection.
• If the phone does not recognise the name, the
phone sounds an alert and prompts for the name
again .
3. The phone dials the corresponding number.
Adjusting the Volume During a Call
During a call, if you want to adjust the voice volume,
use the Volume keys on the left side of the phone.
Press the
key to increase the volume level and the
key to decrease the level.
You can also adjust the keypad tone volume using
these keys in Standby Mode.