33
C
Ca
al
ll
l
F
Fu
un
nc
ct
ti
io
on
ns
s
32
C
Ca
al
ll
l
F
Fu
un
nc
ct
ti
io
on
ns
s
5. Store the number in your Phonebook as you normally
would by pressing the
Save
soft key and following
the screen prompts.
Pause Dialing from a Stored Phonebook Entry
1. Dial the number from Phonebook.
2. If you stored the number using a hard pause, wait
for the appropriate prompt from the number you are
calling (credit card number, back account number,
etc.). When prompted, press the
key to send
the DTMF(Dual-tone Multi-frequency) number that
follows your hard pause.
If the stored number using a two second pause,
your phone transmits the number that follows the
“T” pause two seconds after the connection.
3. “Sending DTMF” flashes on the display and the
transmitted tone sounds.
Manual Pause Dialing
You can enter pauses manually using the options
during the dialing process.
1. Enter the phone number of the service you want to
call, such as a bank’s teleservice phone number.
2. Press the
MENU
soft key to display the options.
3. Select the required pause type and press the
OK
key.
• Press the
4
key for
Hard pause
. The letter “p”
displays, meaning that a hard pause will occur at
that point in the dialing sequence.
• Press the
5
key for
2sec Pause
. The letter “T”
displays, meaning that a “Timed” pause will occur
at that point dialing sequence.
4. Enter the number to be sent after the pause and
then press the
key to dial the first number.
5. For a hard pause, press the
key again at the
prompt to send the additional number after
connecting.
If you enter the number using a 2-second pause, the
phone sends the number that follows the pause two
seconds after the connection.
Voice Dialing
Before using the voice dialing feature, you must record
names and numbers in your phone using the
Voice
Dial
menu (
6-1
). For further details, see page 92.
1. To place a call, press and hold the
key or open
the folder, depending on the
Set Active
menu (
6-1-4
). See page 94.