Samsung SCH-A302 Service Manual Download Page 45 | Manualshive

Page: 45 / 53

background image

SAMSUNG Proprietary-Contents may change without notice

10-1

10. SCH-A302 Circuit description & Circuit Diagrams

1. Logic Section

(1) Power Supply

For the POWER ON, with the battery installed on the phone and by pressing the PWR key, the VBAT
and ON_SW signals will be connected, also by connecting the TA(travel adaptor). This will turn on
Q507(2SC4617). This will turn on U501. This voltage is supplied to pin 6 and pin10 of PM(power
management) U501 , thus releasing them from the shut-down state to output regulated 2.8 V,
thus releasing them from the shut-down state to output regulated 2.8 V.

Simultaneously, VBAT applied to ON_SW will turn on Q508(DTC144EE/TR) resulting in the signal
ON_SW_SENSE to change state from HIGH to LOW. This will allow MSM to send out
PS_HOLD(logical HIGH) to turn on Q507(2SC4617) even after the PWR key is released.

For the POWER OFF, by pressing PWR_KEY of the keypad for few seconds the VBAT voltage will be
applied to the ON_SW and will drive Q508(DTC144EE/TR) to input LOW on the ON_SW_SENSE of
the MSM. The MSM will recognize this and will output LOW on the PS_HOLD.

The v2.8 V) from the pin 6 and pin10 of the U501 is used in the digital parts of MSM.
The v3.0 V) from the pin 20 of the U501 is used in the parts of IFR.
The v3.0 V) from the pin 15 of the U501 is used in the RX parts of RF.
The v3.0 V) from the pin 18 of the U501 is used in the TX parts of RF.
The v2.7 V) from U501 is used in the analog part.

(2) Logic Part

The logic part consists of internal CPU of MSM, Memory and EEPROM. The MSM receives TCXO and
CHIPX8 clock signals from the IFR and controls the phone during the CDMA and the FM mode.
The major components are as follows:

•

CPU : MSM3100C(U609)

- ARM7TDMI µ-processor

•

Memory : U103(MB84VD2219EC-90PBS)

- 16MBIT FLASH ROM

U101(KM616U4110CLZI-7L)

- 4MBIT SRAM

•

EEPROM : U106(AT24C256-10UI-2.7-T.R)

- 256KBIT SERIAL EEPROM

CPU

ARM7TDMI µ-processor is used for the main processing.

The CPU controls all the circuitry. For the CPU clock, 27 MHz resonator is used.

MEMORY (U103 and U101)

16M FLASH ROM(U103)and 4M SRAM(U101) packages are used to store the terminal’s program,
the internal flag information, call processing data, data service, and timer data.
Using the down-loading program, the program can be changed even after the terminal is fully
assembled.

EEPROM(U106)

One 256KBIT EEPROM is used to store ESN, NAM, power level, volume level, and telephone number.

«
...
43
44
45
46
47
...
»

Summary of Contents for SCH-A302






















































Reviews:

No comments

Related manuals for SCH-A302

Brand: Audiovox Pages: 79

Brand: T-Mobile Pages: 4

Brand: Netway Pages: 68

Brand: M4 Pages: 13

myTouch myTouch 3G

Brand: T-Mobile Pages: 113

Brand: Docomo Pages: 194

Brand: Mitel Pages: 60

OneTouch Conquest

Brand: Alcatel Pages: 349

Brand: Hama Pages: 20

Brand: Alcatel Pages: 2

Brand: Vonino Pages: 58

Brand: PolySony Pages: 4

Brand: ATCOM Pages: 60

HANDLEPLUS 326I GSM

Brand: Doro Pages: 280

Brand: Gigaset Pages: 2

Brand: Sagem Pages: 90

Brand: Archos Pages: 180

Brand: Blu Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands