SAMSUNG Proprietary - Contents may change without notice
4-1
4. NAM Programming
NAM feature can be programmed as follows
1. Press
Menu+6+0
to enter the NAM programming mode, and enter the
service code.
2. If you enter the NAM programming mode, each item shows the currently stored data
Go to the next item by pressing the
OK
key
3. You can modify the data by entering a new data and store it by pressing the
OK
key
4. If you enter a wrong digit press the
CLR
key to delete the last digit.
Press and hold the
CLR
key to delete all digits
5. To scroll items backwards or forwards without changing, push the
OK(scroll)
key to the up or down.
6. After finishing the NAM programming, press the
END
key to exit the NAM pragramming mode
.
LCD Display
Key Input
Function
Menu+6+0+
service code
Enter the NAM programming mode
NAM program
1:Setup NAM1
1
Chose 'Setup NAM1'
2:Setup NAM2
NAM1
New data
Phone number is displayed.
Phone #
or
To change the phone number, enter the new one.
3003003000
OK
Press the OK key to store it.
NAM1
New data
Directory number is displayed.
Directory #
or
To change the directory number, enter the new one.
3003003000
OK
Press the OK key to store it.
NAM1
The roaming list is enabled or not.
Activate PRL
OK
To change sytem selection operaiton push the OK(scroll) key
No
to the right or left. Press the OK key to store it.
NAM1
New data
Analog home system ID, current status is displayed.
Anlg HomeSID
or
To change the SID, enter the new one.
32768
OK
Press the OK key to store it
NAM1
New data
1
st
CDMA home system ID, current status is displayed.
Dgtl HomeSID
or
To change the SID, enter the new one.
32768
OK
Press the OK key to store it
NAM1
To program the more NAM item push the OK(scroll) key to
More Prog.?
OK
the right or left. Press the OK key.
No
If service code prompt is displayed, you have to enter the
service code.
