![background image](http://html.mh-extra.com/html/samsung/sch-870/sch-870_service-manual_1189786012.webp)
4-4 Test Procedure
4-4-1 Change to Test Mode
A. To change the phone’s state from Normal Mode to Test Mode, You should enter the following keys.
“* 7 5 9 # 8 1 3 5 8 0”
B. The command “21” is mode and channel change , press “OK” to save.
“10000” or “10001” : AMPS’s Sytem A and Sytem B
“20363”
C. The command “0 1” is Suspend.
D. To finish the Test Mode, You should enter the command “0 2”.
4-4-2 Channel Selection and Tx Power Output Level Control
1.AMPS(FM)
A. Enter to Test Mode (“* 7 5 9 # 8 1 3 5 8 0”).
B. The command “21” is mode and channel change
“10000” or “10001” : AMPS’s Sytem A and Sytem B
C. To finish the Test Mode, You should enter the command “0 2”.
D. “0 1” : Suspend.
E. “4 6” : Vocoder initial to Analog mode.
F. “0 9 0 3 6 3 #” : Set to ‘0363’ channel.
G. “0 7” : Carrier On.
H. “9 7 * * * “ : Output RF power level is set as power level 2
“* * *” means AGC level and AGC level range is from 0 to 511.
I. “1 0 2” : RF Power level control, 2(0~7) means power level .
4-4
Samsung Electronics
Channel number
Mdoe : CDMA
Summary of Contents for SCH-870
Page 2: ...Samsung Electronics Co Ltd Dec 00 Pinted in Korea Code No GH68 01765A ELECTRONICS ...
Page 17: ...5 Exploded View its Parts List 5 1 Main Set Exploded View Samsung Electronics 5 1 ...
Page 39: ...Samsung Electronics 8 1 8 PCB Diagram 8 1 Logic Top View ...
Page 40: ...8 2 Samsung Electronics 8 2 Logic Bottom View ...