![background image](http://html.mh-extra.com/html/samsung/sch-6100-cell-phone-cdma/sch-6100-cell-phone-cdma_manual_1189778013.webp)
COMMAND NO
(OP,AB,RB)
COMMAND SW NO
DESCRIPTION
90(F0,2,0)
91(F1,4,0)
92(F2,3,0)
93(F3,3,0)
94(EF,3,0)
95(F4,4,0)
96(F5,4,0)
97(F6,3,0)
98(F7,3,0)
99(FC,3,0)
100(FF,0,0)
T_HW_CHANFLAT_I
T_SW_CHANFLAT_I
T_FM_TX_PWR_I
T_CH_FLATNESS_I
T_RXRAS_ADJ_I
T_PCS_HW_CHANFLAT_I
T_PCS_SW_CHANFLAT_I
T_PCS_CH_FLATNESS_I
T_PCS_CH_MAX_MIN_I
T_SND_GAIN_I
T_MAX_I
-------
-------
Setting the volume for power level 2
Edge Channel Max/Min Power Code
1) The AB(Input Argument Byte Number) values of these commands are used only in
the manual test. In automatic test mode, the AB is regard as 0.
2) You can assign the value for these commands.
If the AB value is assigned without argument, the test is achieved with the value
stored in EEPROM.
3) After you get a desired test value by performing these commands, if you want to
save the value into the corresponding position.
*OP: Operation Command Number
AB: Input Argument Byte Number
RB: Return Byte Number
*SAT32, 33 are not operating in MSM@ CHIP test
*46 command is required in Rx, and Tx path test at AMPS mode
3-7 CDMA Portable PCS Telephone