7UKPIVJGDCVVGT[
Your Sprint PCS Phone comes with a partially charged,
rechargeable Lithium Ion (LiIon) Battery so that you can
use your the phone immediately after it is activated.
+PUVCNNKPIVJGDCVVGT[
To attach the battery to your Sprint PCS Phone:
1.
Hold the battery so that the metal contacts on the base
of the battery line up with the metal contacts on the
base of the phone.
2.
Place the battery on the back of the phone with the
top of the battery about a quarter of an inch from the
latch.
3.
Gently slide the battery toward the top of the phone
until it snaps into place.
%JCTIKPIVJGDCVVGT[
You can tell whether or not your battery needs to be
recharged by checking the upper-right corner of your
phone’s display.
When the battery charge level gets low, the battery sensor
will let you know by blinking the battery icon, sounding a
tone and displaying a message. If the battery level gets too
low, the phone will turn off automatically. Unfortunately, if
this happens you’ll lose whatever you were just doing,
including dropping your call. Watch the battery strength
icon and make sure your battery is adequately charged.
