overview
12_
overview
Item
Description
a
b
c
d
e
UPDATE
g
1:GND
2:EXT_D/N
3:MD_OUT
4:RS-485+
5:RS-485–
h
f
@
i
j
Internal Cover
It is a cover to protect the main body.
Illumination Sensor
Detects incoming light to control the IR LED.
Lens
Lens for the camera.
IR LED
These infrared LED’s are controlled by the illumination sensor.
SETUP Switch
The switch is used for setting and adjusting the camera’s functions and
properties.
Move this switch left or right to move the cursor or change
the value in the menu.
When menu is off, use this switch for adjusting focus.
VIDEO
Analogue video output terminal of Video.
Use a monitor cable for testing the camera with a portable display.
(for installation)
I/O Port
Earth-grounding port for external signal.
External signal input port for Day/Night mode setup.
Output port that signals when a motion is detected.
Signal port for RS-485 communication.
Signal port for RS-485 communication.
Power Port
Used to plug the power cable.
HD-SDI Video Out
terminal
BNC terminal for HD-SDI video signal output.
Used for the upgrade of the software application.
Move this switch up or down to move the cursor in the menu.
When menu is off, use this switch for adjusting zoom.
Long to press this button toset the function in menu.
To move to a submenu item in the menu, press this switch.
Short to press this button to fit the focus automatically.
T W
N F
/
/