●
setup
English_29
y
DEFOG :
You can use the defog mode to allow the camera to automatically detect the fog
density of the screen and display a clear image despite smog, fog or general poor
visibility.
❶
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow
indicates ‘DEFOG’.
❷
Select a desired mode using the Function Setup switch.
-
AUTO : Adjust the level automatically.
-
Manual : Depending on the defog level set by
the user, adjust the clarity of image.
(LOW, MIDDLE, HIGH)
-
OFF : Released state
M
`
If the defog mode is set to Auto, and if the amount of fog
is reduced, the function level will be also reduced. If you want to maintain the same level of defogging, set it to
Manual.
`
If there is little fog and the manual fog level is high, the screen contrast can get high.
y
PRIVACY : Mask an area you want to hide on the screen.
❶
If the SPECIAL menu screen is displayed,
use the Function Setup switch so that the
arrow indicates ‘PRIVACY’.
❷
Select a desired mode using the Function
Setup switch.
-
AREA : You can select up to 24 PRIVACY
areas.
-
MODE : Determines whether to use the area
selected in the AREA.
-
MASK COLOR : Determine area color. You
can select Green, Red, Blue, Black, White, Gray.
-
TRANSPARENCY : Adds or removes transparency from the masking area.
DEFOG MANUAL SETUP
▶
1.
LEVEL
MIDDLE
2.
RETURN
PRIVACY AREA SETUP
▶
1.
AREA
AREA
1
2.
MODE
OFF
3.
MASK COLOR
GREEN
4.
TRANSPARENCY
OFF
5.
SEL POS
L_TOP
6.
X POS
--------
18
7.
Y POS
-
-------
33
8.
RETURN