●
setup
English_23
expOSURe
1.
When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup
switch so that the arrow indicates ‘EXPOSURE’.
2.
Select a desired mode using the Function Setup
switch.
y
BRIGHTNESS :
Adjusts the video brightness.
y
SHUTTER :
You can select the shutter.
-
MIN : 1 ~ 1/12000
-
MAX : 1/60 ~ 1/12000(NTSC MODEL) ,
1/50~1/12000(PAL MODEL)
-
A.FLK : Select this when you experience picture flicker, this happen when there is a clash
with the installed lighting frequency.
M
`
The greater the shutter value the brighter the screen is but the more the residual images of objects there are.
`
If the min shutter value is large, it can cause noise, spots and white areas but still operate normally.
`
If you do not use the AGC mode on the exposure menu, it cannot be set above 1/60sec(1/50sec).
`
Depending on the setting range of the minimal/maximal shutter, the screen exposure can become saturated.
y
AGC (OFF/LOW/MIDDLE/HIGH)
: The higher the gain level, the brighter the screen - but the
greater the noise.
y
SSNR4 :
This function reduces the background noise in a low luminance environment.
-
OFF : Deactivates SSNR4. Noise is not reduced.
-
ON : Activates SSNR4 so that noise is reduced.
M
`
When adjusting the noise reduction level of the SSNR4 mode, remember that the higher the level set, th e
more the noise level will be reduced but that after image may also occur.
EXPOSURE SETUP
▶
1.
BRIGHTNESS
----
----
50
2.
SHUTTER
3.
AGC
HIGH
4.
SSNR4
ON
5.
RETURN