Setup
28_ Setup
Press the set button.
Enter a title, move the cursor to ‘POS’ and press
the set button. The entered title appears on the
screen. Select the position to display the title on
the screen by using the Function Setup button
and press the set button. When the position
is determined, select ‘END’ and press the set
button to return to the SPECIAL menu.
When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
and Numbers are available in this mode.
If you move the cursor to CLR and press the set button, all the letters are deleted. To edit a letter,
change the cursor to the bottom left arrow and press the set button. Move the cursor over the
letter to be edited, move the cursor to the letter to be inserted and then press the set button.
SYNC :
In areas where the supply is at
60Hz(NTSC), 50Hz(PAL) frequency,
you can synchronize the output
phase of multiple cameras using
the power synchronization func-
tion (Line-Lock) without using a
synchronization signal generator.
INT : Internal Synchronization Type
L/L : Power Synchronization Type, Line-lock
Press the set button.
You can select a desired phase from 0 to 359 when select 'phase'.
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
When the power is DC 12V, the SYNC menu is fi xed to the ‘INT’ mode.
3)
4)
5)
M
y
-
-
1)
2)
M
FRONT DOOR
SYNC
䯝
PHASE
Â
IIIIIIIIIIIIIIIIIIIIIIIIIIIIII
I
0
Press SET to Return
If the VPS is set to ON, synchronization is fixed to INT.
CAM TITLE :
If the SPECIAL menu screen is displayed, use
the Function Setup button so that the arrow
indicates ‘CAM TITLE’.
Set it to ‘ON’ by using the Function Setup
button.
y
1)
2)
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
← →
C L R P O S E N D
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you enter a title, the title will
appear on the monitor.
Use the Function Setup button to move
to a desired letter and select the letter by pressing the set button. Repeat this
to enter multiple letters. You can enter up to 15 letters.