manualshive.com logo in svg

Samsung SCD-3083, User Manual, Page: 14 / 38

Share
Download
Samsung SCD-3083 User Manual Download Page 14

Installation

14_ Installation

Adjusting the monitoring direction for the camera

Pan

Tilt

Lens rotation

 

Adjusting the monitoring direction

You can adjust the camera direction only when the camera is fixed on the ceiling.

 

J

 

The image can be covered up by the camera case depending on the angle.

 

Do not forcefully turn the focus/zoom lens after the dome case is disassembled.
Otherwise, it may cause an incorrect focus due to a motor failure.

 

Methods of adjustment

1. 

After installing the camera, adjust the panning angle in consideration of the 
monitoring direction.

2. 

Set the horizontal angle so that the image is not reversed.

3. 

Adjust the tilt angle so that the camera faces toward the monitoring object.

Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt 

is called Tilt, and turning the lens on its axis is called Rotation.

 

 

- The effective range of pan is a total of 352 degrees.

 

- The effective range of rotation is a total of 348 degrees.

 

- The effective range of tilt is a total of 73 degrees.

Summary of Contents for SCD-3083







































Reviews:

No comments