English_13
●
INSTALLATION
2.
3.
the camera by rotating it anti-clockwise.
Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of
Place the separated ceiling bracket so that the “Front” side faces the area to be monitored
and install it with the M4 tapping screws.
Ceiling bracket
tapping
screw
Pan Base
fixation
screw
If
you
want
to
install
the
camera
with
the
ceiling
bracket combined, fix it using two tapping
screws
at the side of the main body
＊
4.
5.
To combine the main body with the ceiling bracket, make sure that the pan base fixation screw
face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.
Adjust the camera lens to face the area to be monitored and fix the main body and
the dome cover by aligning the grooves and rotating the body clockwise.
tapping
screw