●
se
TU
p
English_21
WHite bal(WHite balaNCe)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that
the arrow indicates ‘White Bal’.
2.
Select a desired mode using the Function Setup switch.
※
Select one of the following 5 modes, as appropriate for your purpose.
ATW:
Select this when the color temperature is between 1,700°K and 11,000°K.
OUTdOOR
: Select this when the color temperature is between 1,700°K and 11,000°K.(sodium light
inclusion)
INdOOR
: Select this when the color temperature is between 4,500°K and 8,500°K.
MaNUal
: Select this to fine-tune White Balance manually.
Set White Balance first by using the ATW or AWC mode. After
that switch to MANUAL mode, fine-tune the White Balance
and then press the Function Setup switch.
aWC
→
Set
: To find the optimal luminance level for the
current environment, point the camera towards a sheet of
white paper and press the Function Setup switch. If the environment changes, readjust it.
`
White Balance may not work properly under the following conditions. In this case, select AWC
↑
SET
mode.
1
When the color temperature of the environment surrounding the subject is out of the control range
(e.g. clear sky or sunset).
2
When the ambient illumination of the subject is dim.
3
If the camera is directed towards a fluorescent light or is installed in a place where illumination
changes dramatically, the White Balance operation may become unstable.
M
WB MANUAL
RED GAIN
IIIIII
*
IIIIIIIIIIIIIIIIIIII
106
BLUE GAIN
IIIIIIIIIIIIIIIII
*
IIIIIIIIII
259
Press SET to Return
SCD-1080_ENG.indd 21
2012-8-27 10:33:08