20_ setup
setup
expOsURe
1.
When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch
so that the arrow indicates 'EXPOSURE'.
2.
Select a desired mode using the Function Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select shutter mode.
- MANUAL : You can control shutter speed manually.
(1/50~1/120,000)
- A.FLK : Select this when you experience picture flicker, which can happen when there is a
clash with the frequency of the installed lighting.
AGC (AUTO GAIN CONTROL)
（
OFF/LOW/MID/HIGH
)
: The higher the gain level, the brighter the screen-
but the higher the noise.
RETURN
：
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
defOGGING
Through the defogging function, camera can automatically recognize fog concentration of the image, defog,
self correct in hazy, rainy, flue gas and other inclement weather to get a clear image.
1.
When the SETUP menu screen is displayed, select ‘DEFOG’ by using the Function Setup switch.
2.
Select a desired mode.
AUTO: The camera will automatically correct image according to
the defogging level (low, middle, high) set by the user.
Manual: The camera will adjust the definition of the image
according to user's preferences through the defogging level
(low, middle, high).
OFF: Turn off Defogging function.
`
Defogging and SSDR function cannot be run simultaneously. When defogging function is set to AUTO
or MANUAL mode, SSDR function is not available. When SSDR functions is turned on, defogging
would become inactive.
M
DEFOG SETUP
1.LEVEL
MIDDLE
2.RETURN
EXPOSURE SETUP
1. BRIGHTNESS
IIIIIIIII*IIIIIIII
10
2. SHUTTER MANUAL
3.
AGC MIDDLE
4. RETURN
SCD-1080_ENG.indd 20
2012-8-27 10:33:08